A super-powered 4WD, this premium compact workhorse is built to handle medium- to heavy-duty applications. Available from 40 to 49 HP, this professional grade tractor also allows for a wide variety of attachments and customizations ranging from heavy-duty loaders and backhoes to your choice of PST or HST transmissions, this is a tractor that’s sure to meet your needs.
- Clear view, electronic instrument panel with multi-function warning lights
- Enhanced styling for sleek integrated look with a curved boom loader to match
- Heavier, stronger built chassis makes our tractors heavier & safer with better traction
- Heavier-built, solid 3-point hitch linkage - compare it to others & literally see the difference
- Lift heavier loads with the powerful new ML120 Mahindra front loader
- Optional Grille Guard with push/pull pin & lock flips down for easy access to engine
- Reliable Mahindra engine: ultra-quiet, fuel-efficient, four-stroke direct-injection, water-cooled diesel conforms to EPA Tier IV norms
- Standard deluxe suspension seat with back angle & weight adjustment
- Standard foldable ROPS
- Standard industrial tires are widest in their class, for greater stability
- Standard hydrostatic power steering with tilt column
- Standard full SynchroMesh transmission with hydraulic power shuttle & 12 Forward & 12 Reverse speeds
- Thicker-gauge reinforced metal fenders outshine & outlast the competitors' cheap plastic
- Standard rear worklights for increased visibility on the job
- Stronger, sturdier-built front axle on every Mahindra beats the competition's
- Type: Four-stroke, naturally aspirated, common rail, direct injection, water-cooled diesel
- Cylinders: 4
- Engine HP (kW) @ rpm: 49 (36.5) @ 2800 (T4)
- Compression Ratio: 18.7:1
- Displacement cubic inch3 (cc): 166.7 (2732)
- Fuel Tank Capacity: 14.5 gal.
- Battery Capacity: 12 volt, 96 AH
- Alternator: 12 volt, 120 amps
- Type: Power shuttle with full synchromesh
- Number of Gears / Speeds: 12F / 12R
- Type: Hydrostatic, tiltable
- Pump Output (gallons per minute): 5
- Type: Open center, full-live hydraulic with position and draft controls
- Pump Output (gallons per minute): 11
- 3-Point Linkage: Category 1/2 with telescopic stabilizers & flex links
- Lift Capacity (lbs.): 3090
- Rear Auxiliary Remote Valves: One standard, two optional
- Type: Independent
- PTO RPM (engine rpm): 540 @ 2404
- PTO HP (kW): 40 (29.8)
Dimensions with Ag Tires
- Overall Length Inches (mm): 128.9 (3274)
- Overall Width Inches (mm): 75.4 (1915)
- Turning Radius Minimum Feet (meters): 10.3 (3.2)
- Overall Height inches (mm): 100.8 (2560)
Tires - Sizes and Options
- Ag (Front / Rear): 9.5-20 / 16.9-24
- Industrial (Front / Rear): 14x17.5 / 19.5Lx24
- Turf (Front / Rear): 31x13.50-15 / 21.5L-16.1
Optional Attachment - Loader
- Loader Model: 3550CL
- Maximum Lift Height: 111.5 in.
- Clearance with Attachment Dumped: 92 in.
- Reach at Maximum Height: 24.75 in.
- Maximum Dump Angle: 40 deg.
- Attachment Rollback Angle: 20 deg.
- Digging Depth Below Grade: 4.5 in.
- Lift Capacity to Full Height @ Pivot Pins: 2700
- Breakout Force @ Pivot Pins: 5100
- Rated Flow (Tractor System): 11 gpm
- Attachment Width: 75 in.
- Attachment Rated Capacity: 17 cu. ft.
- Cycle Times @ rpm: 3080
- Raise Boom (seconds): 5.7
- Lower Boom (seconds): 4.3
- Dump Attachment (seconds): 4.9
- Retract Attachment (seconds): 3.5
- Transport Weight (lbs.): 1450
Optional Attachment - Backhoe
- Backhoe Model: 65B
- Transport Height: 98”
- Maximum Digging Depth: 108”
- Digging Depth (2 Ft.) Flat Bottom: 104”
- Overall Operating Height - Fully Raised: 121”
- Loading Height (bucket @ 60°): 90”
- Loading Reach (bucket @ 60°): 66.3”
- Reach From Swing Post: 150”
- Bucket Rotation: 180°
- Swing Arc: 180°
- Stabilizer Spread Operating Position: 90”
- Stabilizer Down Below Grade: 10”
- System Relief Valve Setting: 2750
- Digging Force - Bucket (lbs.): 3800
- Digging Force - Dipper (lbs.): 2400
- Transport Weight (lbs.): 1100
Specifications and design subject to change without notice.